Samsung SGH-T679DBWTMB User Manual
Page 16
12
Note: Verify that the battery is installed prior to
connecting the wall charger. If both the wall
charger is connected and the battery is not
installed, the handset will power cycle
continuously and prevent proper operation.
Failure to unplug the wall charger before
you remove the battery, can cause the
phone to become damaged.
Important! It is recommended you fully charge the
battery before using your device for
the first time.
1. Locate the Charger/Accessory jack and
slide open the cover (1).
2. Insert the USB cable into the device’s
Charger/Accessory jack (2).
3. Plug the charging head into a standard AC
power outlet. The device turns on with the
screen locked and indicates both its
charge state and percent of charge.
Note: This illustration displays both the correct
and incorrect orientation for connecting the
charger. If the charger is incorrectly
connected, damage to the accessory port
will occur therefore voiding the phone’s
warranty.
4. When charging is finished, first unplug the
charger’s power plug from the AC wall
outlet, then disconnect the charger’s
connector from the phone.
Correct
Incorrect