Samsung MX-FS8000-ZA - Manual (Page 6)

6
English English
7
Description
1. Cooling fan
• The fan operates while the unit is powered on.
If you set the unit to the minimum volume, the fan
won't operate.
Secure a minimum 10 cm of clear space from all
sides of the fan when installing the product.
2. VOLTAGE SELECTOR
• Switch power voltage to 115V or 230V.
3. POWER
• Insert only provided power cable.
4. 2.2 CH Speaker Terminals
1. To achieve the correct sound quality, when you con-
nect the speakers, match the color of the speaker
plugs to the color of the speaker jacks. See below.
• LEFT channel (marked L , White/Purple).
• RIGHT channel (marked R , Red/Purple).
• Don't force in the Purple SUBWOOFER connector
into the White or Red speaker jack.
5. LED Terminals for Speaker Beat Waving,
which do not distinguish between left and
right channel.
6. ONLY FOR SERVICE
• This jack is just for testing, please don't use it.
7. AUX IN 2 Terminals
1. Use an Audio Cable (not supplied) to connect AUX
IN 2 on the product to Audio Out on the external
analog output device.
• Be sure to match connector colors.
• If the external analog output device has only one
Audio Out jack, connect either left or right.
• Press the TUNER/AUX button to select the AUX 2.
• If no button actions for more than 8 hours in AUX
mode, the power will automatically turn off.
8. AM Antenna Terminals
1. Plug the connector of the AM antenna into the AM
antenna connector terminal on the rear of the
product.
9. FM Antenna Terminals
1. Connect the FM antenna to the FM antenna con-
nector terminal.
2. Slowly move the antenna wire until you find a
location where reception is good, then fasten it to
a wall or other rigid surface.
3. If reception is poor, you may need to install an
outdoor antenna. To do so, connect an outdoor
FM antenna to the FM socket on the rear of the
system using a 75
Ω coaxial cable (not supplied).
Rear Panel
230V
115V
VOLTAGE SELECTOR
6 5 3 4 8 9 7
1 2
MX-FS8000-ZP-ENG_130927.indd 6 2013-09-27 �� 2:00:57