Samsung LNS4041DX-XAP - Manual (Page 43)

English-41
Option 2: Setting the Clock Automatically
1. Press the MENU button to display the menu.
Press the or buttons to select “Setup”, then press the ENTER button.
Press the or buttons to select “Time”, then press the ENTER button.
2. Press the ENTER button to select “Clock”.
3. Press the ENTER button to select “Clock Mode”.
Press the or buttons to select “Auto”, then press the ENTER button.
4. Press the or buttons to select “Time Zone”, then press the ENTER button.
5. Press the or buttons to highlight the time zone for your local area
(and to move the highlight to the appropriate time zone on the map of the
United States), then press the ENTER
button.
6. Press the or buttons to select “DST” (Daylight Saving Time), then press the
ENTER button.
Press the or buttons to select “On” or “Off”, then press the ENTER button.
Press the EXIT button to exit.
Depending on the broadcast station and signal, the auto time may not be set correctly.
If this occurs, set the time manually.
Antenna or cable must be connected in order to set the time automatically.
BN68-01001A-01Eng.qxd 2/15/06 7:10 AM Page 41