Playing back a tape reproducir una cinta – Samsung SC-W87-XAC User Manual

Page 50

Advertising
background image

ENGLISH

ESPAÑOL

50

Playing back a Tape

Reproducir una cinta

Multi Playback (using a PAL60 System)

This Camcorder can convert an NTSC tape recorded in
the SP mode to the “PAL60” format, allowing you to
view it on a PAL TV which has Vertical sync adjustment
circuitry for 60Hz.
-

“PAL60” is a special output signal format with which
a PAL TV can be used to view a tape recorded by
an NTSC recorder.

1.

Set POWER switch to PLAYER mode.

2.

Insert an NTSC tape you want to see.

3.

Press MENU ON/OFF button, then the MENU list will
appear.

4.

Turn the UP/DOWN dial to “PAL CONV........OFF”

5.

Press ENTER, then it will change to
“PAL CONV........PAL60”

Now you can see the picture by pressing the PLAY
button.

6.

Press MENU ON/OFF button to end setting.

Notes:

1. This Camcorder can not record using the

“PAL60” system.

2. When an NTSC tape is being played back,

the picture on the monitor screen shrink in
the Vertical direction.

3. If the signal recorded on the tape is in bad

condition, the PAL60 playback system may
malfunction.

4. A PAL recorded tape can not be normally

played back when “PAL60” is set or dis-
played.

Multi reproducción (usando un sistema PAL60)

Esta videocámara puede convertir una cinta grabada
en NTSC modo SP, en formato de señal “PAL60”,
permitiendo verla en un PAL TV el cual tiene sincronía
vertical ajustada a una red de circuitos para 60Hz.
-

PAL60 es un formato especial de salida de señal
con la cual una PAL TV puede ser usada para ver
la grabación de una cinta previamente grabada en
NTSC.

1. Ponga el interruptor de poder (POWER) en el modo

PLAYER.

2. Inserte la cinta NTSC que desea ver.

3. Presione el botón de MENU ON/OFF, y aparecerá la

lista del menú.

4. Gire la perilla de UP/DOWN a “PAL CONV........OFF”.

5. Presione ENTER, y se cambiara a

“PAL CONV........PAL60”.

Ahora podrá ver la imagen presionando el botón
de PLAY.

6. Presione el botón de MENU ON/OFF para terminar.

Notes:
1. Esta videocámara no puede grabar usando el

sistema PAL60.

2. Cuando una cinta NTSC esta siendo reproducida, la

imagen en la pantalla se encogerá en dirección vertical.

3. Si la señal grabada en la cinta es de mala calidad,

la reproducción del sistema PAL60 podría malfuncionar.

4. Una cinta grabada en PAL normalmente no puede

ser reproducida cuando PAL60 este puesto o
mostrándose.

00606D SCW80/W87 USA+ESP(42-59) 3/19/03 4:39 PM Page 50

Advertising
This manual is related to the following products: