Samsung RF268ACBP-XAA - Manual (Page 22)

22_ Operating
Operating your French Door Refrigerator
using tHE ContRoL PAnEL
1 2
Freezer Temp ( 1 ) indicates the current Freezer temperature.
Fridge Temp ( 2 ) indicates the current Refrigerator temperature.
If you do not press any button, the freezer & fridge temperature indicator will turn off in a few seconds.
If any button is pressed, the display will light up again.
Power Freeze
This icon will light up when you press the Freezer / Power Freezer button for 3 seconds. Power Freeze
is great when you need a lot of ice. When you have enough ice, just press the same button again for 3
seconds to cancel the Power Freeze mode. After 2 and a half hours, Power Freeze mode will turn off
automatically to decrease energy consumption.
Cubed ice , Crushed Ice , Water
Enjoy cubed or crushed ice by selecting your preference from the digital control panel. If you don’t need
ice, turn the function off to save on water and energy consumption. Each Ice type icon will light up
depending on what is currently chosen.
Power Cool
This icon will light up when you press the Fridge / Power cool button for 3 seconds. For a quick fridge
cool down, use Power Cool mode. If you want to cancel the Power Cool mode, just press the same
button again for 3 seconds. After 2 and a half hours, Power cool mode will turn off automatically to
decrease energy consumption.
Cooling off Mode (“OF & OF” code on the display)
Cooling Off stops cooling in the freezer and refrigerator compartments, but does not shut off electrical
power to the refrigerator. To use this feature, press
energy Saver Button and Freezer/ Power cool
Button simultaneously for 3 seconds until an alarm sound is heard. To cancel this mode, press the same
buttons again for 3 seconds.
Filter
When the filter indicator light is on, it is time to change the filter. Typically this happens about every 6 months.
The filter indicator will be Blue when you initially insert the water filter.
The filter indicator will be Light Pink when you have used your water filter for 270 gallons.
The filter indicator will be Red when you have used your water filter for 300 gallons.
After removing the old water filter and installing a new one(see page 36 for instructions on how to do this)
when the filter indicator is red, reset the indicator by pressing and holding the “Alarm/Hold 3 sec for Filter
Reset” button for 3 seconds.(The filter indicator will be blue or yellow green when the indicator is reset.)
This function is for store display refrigerators. It is not for customer use.