A&D Dual Memory Wrist Blood Pressure Monitor UB-512 User Manual
Page 14
E-10
ABOUT MEMORY
The memory function on the UB-512 blood pressure monitor is designed for two or
more people. For each START button, the monitor can store up to 50 readings
in memory. To keep track of previous measurements accurately, we recommend
that you use the same START button each time you take a blood pressure reading.
To recall previous measurements in memory, press and hold the
START 1 or START 2 button. Your average blood pressure
reading will appear with the number of measurements taken
flashing several times. Release the button after the display
switches to the memory index number (see illustration on right).
The previous measurements are displayed from most recent to
oldest. When viewing previous measurements, you will see the
"M" symbol appear on the upper left corner of this display. You can
stop this by pressing either START button again.
NOTE: Memory will be lost if batteries become low or are
removed.
LifeSource Health Line (Toll-Free): 1-888-726-9966