Samsung BD-C6800-XAA - Manual (Page 38)


English
Setup
System
Initial Settings
By adjusting the Initial Settings, you can set
language, TV aspect ratio, and Network Settings,
etc.
For more information on the settings, refer to the
corresponding section in this user manual.
(See pages 30~45)
Internet@TV Screen Size
Set the Internet@TV Screen to the optimal size.
Size 1 : Display smaller application icons.
You may see some black on sides of screen.
Size 2 : Display normal application icons.
The image may be too large for your TV screen.
Size 3 : Display larger application icons.
The image may be too large for your TV screen.
Anynet+(HDMI-CEC)
Anynet+ is a convenient function that offers linked
operations with other Samsung players that have
the Anynet+ feature.
To operate this function, connect this player to an
Anynet+ Samsung TV with an HDMI cable.
You can then operate this player using a Samsung
TV remote control and start disc playback simply
by pressing the PLAY ( ) button on the TV’s
remote control.
For more information, please see the TV’s user
manual.
On : Anynet+ functions is on.
Off : Anynet+ function is off.
NOTE
This function is not available if the HDMI cable does
not support CEC.
If your Samsung TV has an n logo, then it
supports the Anynet+ function.
Depending on your TV, certain HDMI output
resolutions may not work.
Please refer to the user manual of your TV.
•
•
•
•
•
✎
▪
▪
▪
BD Data Management
Lets you manage the downloaded contents you
accessed through a Blu-ray Disc that supports the
BD-LIVE service.
You can check the device information including
the storage size, delete the BD data, or change
the Flash memory device.
Change Device allows you to select either the
player’s Internal Memory or External Memory
(connected USB Device).
If the data to be stored from BD-LIVE is greater
than the size of the remaining memory or the
Internal Memory is full, connect an External USB
device, then select External Device in the menu.
Description of Device (Storage) Information on
the Player
Total Size : Total memory size of the
Device(Storage).
Available Size : Available memory in the Device
(Storage).
NOTE
In the external memory mode, disc playback will
be stopped if you disconnect the USB device in the
middle of playback.
Only those USB devices formatted in FAT file system
(DOS 8.3 volume label) are supported.
We recommend you use USB devices that support
USB 2.0 protocol, 4 MB/sec or faster read/write
speed.
The Resume Play function may not work after you
format the storage device.
The total memory available to BD Data Management
may differ, depending on the conditions.
•
•
✎
▪
▪
▪
▪
Display
Audio
System
Network
Language
Security
General
Support
Settings
BD Data Management
Current Device : Internal Flash Memory
Total Size : 703MB
Available Size : 700MB
Delete BD Data \
Change Device : Internal Flash Memory
" Select ' Return