Samsung HW-H600-ZA - Manual (Page 10)

REMOTE CONTROL
10
Bluetooth POWER
Press the Bluetooth POWER button on the remote to turn the
Bluetooth Power function on and off.
See pages 16 and 18 for details.
POWER
Turns the SoundStand on and off.
VOLUME
Adjusts the volume level of the unit.
SOUND EFFECT
Press SOUND EFFECT on the remote control to select a sound
mode. Select the STANDARD mode if you want to enjoy the
original sound. We recommend that you select a Sound Effect
mode based on the source material and your personal taste.
Skip Back
If there is more than one file on the device you are playing, and
you press the # button, the previous file is selected.
MUTE
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
SOURCE
MUTE
SYNC
SYNC
POWER
SOUND
EFFECT
REPEAT
Bluetooth
POWER
VOL
WOOFER
LEVEL
Surr.
Sound
DIMMER
AUDIO SYNC
If the SoundStand is connected to a digital TV and the video
appears out of sync with the audio, press the Audio Sync buttons
to sync the audio with the video.
Press the AUDIO SYNC +/- buttons to set the audio delay from 0
to 300 ms. In USB mode, TV mode, or BT mode, the Audio Sync
function may not work.
+ Installing Batteries in the Remote Control
1. Use a coin to turn the
remote control cover
counterclockwise to
remove it as shown in the
figure above.
2. Insert a 3V lithium battery. Keep
the positive (+) pole facing up
when inserting the battery. Put the
battery cover on and align the '●'
marks side by side as shown in the
figure above.
3. Use a coin to turn the cover
clockwise as far as it will go to
fix it in place.