Samsung LS20CMYKF-ZM - Manual (Page 42)

• Auto • Wide
• Auto - The screen is displayed in accordance with the screen aspect ratio of the input
signals.
• Wide - A full screen is displayed regardless of the screen aspect ratio of the input signals.
Note
• Signals not available in the standard mode table are not supported.
• If the wide screen which is the optimal resolution for the monitor is set on your PC, this
function is not performed.
MENU → , → → , → → , → MENU
Information
Shows a video source, display mode on the OSD screen.
MENU → , →MENU
{2233SN} Direct Functions
AUTO
When the 'AUTO' button is pressed, the auto adjustment screen appears as shown in the
animated screen on the center.
Auto adjustment allows the monitor to self-adjust to the incoming Analog signal. The values
of Fine, Coarse and Position are adjusted automatically.
Adjusting the Monitor