Audio Authority 1332 - Manual (Page 9)

9
6.0 TROUBLESHOOTING
If the switcher does not appear to be functioning, make certain that
all the DVI sources and the DVI capable monitor are functioning
correctly by connecting each DVI source in turn directly to the
monitor using a cable with a length of 6 feet or less. If the signal
is present under those conditions, make certain that the power is
present on the switcher. If it is, measure the cable length you are
attempting to use between the sources to the switcher and the
switcher to the monitor. The cables must be 6 foot long or less. Lastly,
Inspect the cables and connectors for damage.
6.1 HDMI Displays
The 1332 or 1334 DVI output signal can be converted to HDMI using
a cable or converter, but the resulting signal may not be compatible
with all HDMI displays.
6.2 Cable Length
If you need to span a distance of greater than 6 feet, purchase Audio
Authority’s 1351 Repeater which will allow you to extend a cable run
up to 40 feet.
6.3 Complex Confi gurations
Due to the nature of High-bandwidth Digital Content Protection,
and the many types of information that must be passed along
the chain of devices, complex confi gurations involving DVI
distribution amps and switchers may not work as expected. Do not
use a DVI switcher in the signal path after a distribution amp; this
confi guration does not work.
If the problem still persists after trying the above suggestions,
contact the Audio Authority Technical Service department via email:
[email protected], or call 800/322-8346 or 859/233-4599.