Samsung SPH-M920ZKASPR - Manual (Page 124)

110 2G. Voice Services
Ⅲ Always use my settings overrides any conflicting
application settings with those you set up within
this text-to-speech settings screen. If enabled, and
available as a feature, your device will default to
using the text-to-speech feature.
Ⅲ Speak incoming CallerID enables the device to
verbally read out incoming Caller ID information
for known and current Contacts.
Ⅲ Speech rate adjusts the rate at which onscreen
text is spoken by the device. Choose from: Very
slow , Slow , Normal , Fast , and Very fast .
Ⅲ Language assigns the language used by the
verbal readout. Choose from American English or
Spanish .
3. Press to return to the previous screen.
To enable verbal readout of an incoming call:
1. Press > and tap >
Text-to-speech .
2. Tap Speak incoming CallerID (to place a green
checkmark on the option). Callers who are already
in your Contacts list will be verbally announced.
Voice Search
Voice Search works similarly to the Voice Dialer. It uses
built-in voice recognition software to listen to your
spoken words, convert those to text, and then launch a
Google search using that text.
1. Press and tap > (Voice
Search).
2. Speak clearly into the microphone. If an error
occurs, tap
Try again .
3. From the onscreen Google search page, tap a
matching entry.
For more information, see “Using Your Device to
Search” on page 26.
SPH-M920.book Page 110 Friday, October 8, 2010 2:17 PM