Samsung DV48H7400GW-A2 - Manual (Page 22)

English - 22
operating instructions, tips
SanItIZE – Sanitizes garments by infusing high temperature heat deep into
the fabric during the drying cycle. Use this cycle to keep your bedding and
curtains clean through sanitization.
DElIcatES – The Delicates cycle is designed to dry heat-sensitive items at a
low drying temperature.
toWElS (DV48(5)H7400E(G)*, DV45H7200E(G)*) – To dry bath towels and
similar items.
pErm prESS – Dry wrinkle-free cottons, synthetic fabrics, knits, and
permanent press fabrics automatically.
quIck Dry – Provides a 30 minute drying cycle.
tImE Dry – Time Dry allows you to select the desired cycle time in minutes.
Turn the Cycle Selector dial to Time Dry, and then press the Adjust Time up
arrow to set the drying time. Press the arrow repeatedly to scroll through the
time settings.
reFresh (DV48(5)H7400E(G)*) – Use to smooth out wrinkles and reduce
odors in loads of one to four items. In this cycle a small amount of water is
sprayed into the dryer drum after several minutes of tumbling with heat.
aIr fluff (DV45H7200E(G)*) – The Air Fluff cycle tumbles the load at room
temperature air.
WrinKle aWay (DV48(5)H7400E(G)*) – Reduce wrinkles in dry clothes that
have been left in a closet for a while by providing advanced wrinkle release
performance through optimized steam care. Reduce wrinkles in up to 3 items
at a time.
You can change the drying time using the Adjust Time button.
WrInklE rElEaSE (DV45H7200E(G)* / DV45H7000E(G)* ) – The Wrinkle
Release cycle will release wrinkles from items that are clean, dry, and only
slightly wrinkled, such as clothes from a crowded closet, suitcase or items that
have been in the dryer too long after the cycle has ended. Wrinkle Release can
be used with any temperature selection.
digital graphic
display
The display window shows the estimated time remaining in the cycle after
you have pressed the Start/Pause button. The estimated time remaining may
fluctuates as the cycle progresses.
The Drying light will illuminate and remain lit until the cycle is complete.
When your dryer is in the cool-down phase, the Cooling light will illuminate. When
your dryer is in the wrinkle prevent phase, the Wrinkle Prevent light will illuminate.
When the cycle is complete, “End” (DV48(5)H7400E(G)* / DV45H7200E(G)*) /
“0” (DV45H7000E(G)* will appear in the display panel until you push
the Start/Pause button or the Power button.
If your dryer is paused during a cycle, the indicator lights will blink until you press
the Start/Pause button.
dry level
selection button
To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles,
press the Dry Level button. An indicator light will illuminate next to the dryness
level you selected.
Press the button repeatedly to scroll through the settings. Larger or bulkier
loads may require the Very Dry or More Dry setting for complete dryness.
Damp Dry is designed to partially dry items. Use for items that lay flat or hang
to dry.
Temp selection
button
To select the temperature for the load, press the Temp button. An indicator
light will illuminate next to the temperature you selected. Press the button
repeatedly to scroll through the settings.
High – For sturdy cottons or those labeled Tumble Dry.
medium – For permanent press, synthetics, lightweight cottons, or items
labeled Tumble Dry Medium.
low – For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.
Extra low (DV48(5)H7400E(G)*, DV45H7200E(G)*) – Provides the lowest
heated drying temperature possible.
4
3
2
DV7000HA DRY_DV48H_USER MANUAL_DC68-03170J-01_EN.indd 22 2014-2-25 16:31:42