Samsung SGH-T719DSBTMB - Manual (Page 151)

Section 11: Applications 151
Using Voice Recognition
2. After a brief pause, a list of optional commands appears on the
display and the audio prompt “Say a command” plays through the
earpiece.
3. Say “Call” and the area code and number that you want to dial at a
distance of 3-12 inches from the phone in a natural voice.
4. If VoiceSignal is not sure of the number that you said, a list of
possible matches appears on the display. You are asked to confirm
the correct number as VoiceSignal displays the results. Say “Yes”
or “No” to confirm or reject the number when prompted.
The number that you said is repeated through the earpiece then
your phone will dial the number.
Name Dialing
To use Name Dial, you’ll need to have entries stored in your Phonebook. See
‘Section 6: Phonebook” on page 49 for information on creating Phonebook
entries.
1. In Idle mode, select the VoiceSignal shortcut (Right Navigation
key). You can also select Voice recognition from the Utilities
menu in Applications.
2. After a brief pause, a list of optional commands appears on the
display and the audio prompt “Say a command” plays through the
earpiece.
3. Say “Call” and the name of the contact that you want to dial.
The name that you said is repeated through the earpiece and your
phone dials the number.
t719.book Page 151 Thursday, June 29, 2006 1:44 PM