Samsung DVD-V9650-XAA - Manual (Page 22)

ENG-22
C
O N N E C T I O N S
Connection to an Audio System (Dolby digital, MPEG2 or DTS
Amplifier)
1
Using a coaxial cable or an optical cable (not
included), connect the DIGIT AL AUDIO OUT
(COAXIAL) or DIGIT AL AUDIO OUT (OPTICAL)
terminal on the rear of the DVD-VCR to the
DIGIT
AL AUDIO IN (COAXIAL) or DIGIT AL
AUDIO IN (OPTICAL) terminal of the Amplifier.
3
T urn on the DVD-VCR, TV, and Amplifier.
4
Press the input select button of the Amplifier to
select external input in order to hear sound from
the DVD-VCR.
Refer to your Amplifier's user manual to set the
Amplifier's audio input.
Notes
- When you connect the DVD-VCR to DTS Amplifier and play a DTS disc, set the DTS to On in Audio
Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 61 to 62)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
2
Using the video signal cable(s), connect the
VIDEO, S-VIDEO or COMPONENT
OUT
terminals on the rear of the DVD-VCR to the
VIDEO,
S-VIDEO or COMPONENT IN terminal
of your TV as described on pages 15 to 18.
Dolby digital or
DTS Amp.
Coaxial Cable
(not included)
Optical Cable
(not included)
00956F V9650 XAA_Eng1*04 soft * 17/3/06 09:04 Page 22