Samsung SGH-A777ORAATT User Manual

Page 93

Advertising
background image

89

Configuring your Phone’s Network Profiles

1.

When the Idle screen displays, press the Menu soft key,

then select Settings

Connectivity

Network Profiles.

2.

Highlight one of these options:

• MEdia Net

• AT&T MMS

• AT&T IMS

Note: The MEdia Net WAP is pre-configured and cannot be altered on this

screen. The AT&T MMS connection option can be edited, renamed, or
deleted on this screen. Your phone is set up by default for connecting
to the network. If you change the settings without first checking with
your service provider, the web browser, MMS, and e-mail features may
not work properly.

3.

To create a new connection, press the Options soft key,

then select New.

- or -

To edit the existing AT&T MMS, highlight this entry, press

the Options soft key, then select Edit.

4.

Select the parameter you want to edit:

• Set Name: enter a profile name.

• Access Name: edit the access point name.

• Auth Type: select the type of authentication used for this WAP

connection: None, Normal, or Secure.

• User ID: enter the User ID required to connect to the network.

• Password: enter the user password required to connect to the

network.

• Protocol: set the connection protocol used by the WAP browser:

WAP, HTTP, or Other.

• Home URL: enter the URL address of the page to be used as your

homepage.

• Proxy address: MEdia Net set as the proxy server address and

port.

• Linger Time (Sec.): set a time period (in seconds) after which the

network is disconnected if there has been no new data traffic in that
time.

• Advanced Settings: allows you to configure some of the IP-specific

information: Static IP, Static DNS, Server information, and Traffic
Class.

Static IP: specify if you want to manually enter an IP address. If you
want the IP address to be automatically assigned by the server, remove
the check mark.

Static DNS: specify if you want to manually enter the Domain Name
Server (DNS) address. If you want the address to be automatically
assigned by the server, remove the check mark.

Traffic Class: select the traffic class.

a777.book Page 89 Friday, September 26, 2008 4:08 PM

Advertising
This manual is related to the following products: