Calls – Samsung SGH-A777ORAATT User Manual

Page 88

Advertising
background image

Changing Your Settings 84

Important!: Please note that the hearing aid category specified for this

product represents compatibility only when the phone is in the
slide open configuration, which has maximum antenna
efficiency. When the option is enabled and the slide is open
during a call, the t-coil will adjust the audio for use with t-coil
hearing aids (see “FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices”
on page 154.).

Calls

This menu allows you to change the actions taken by the phone
when dialing and receiving calls.

When the Idle screen displays, press the Menu soft key and

select Settings

Calls. The following options are available.

Use the Down Navigation key to scroll to and set options:

General

This allows you to configure some common high level
parameters used by the phone for most types of calls.

Show My Number

: allows you to select how your ID is handled when an

outgoing call is initiated. Use the

Up

or

Down

Navigation key to highlight

your selection. Press the Select soft key or the

key to make your

selection. Options include:

Set By Network

: you are identified to the other party using the default

network information.

Show Number

: your phone number and name are sent to the other

party.

Hide Number

: your identifying information is hidden from the other

party.

Call Answer

: allows you to select how your phone answers incoming calls.

Use the

Up

or

Down

Navigation key to highlight your selection. Press the

Options

soft key, then the

Select

soft key to save your new selection.

Options include:

Send Key

: allows you to answer an incoming call by pressing either

the

Accept

soft key or the

key.

Open Slide: allows you to answer an incoming call by opening the
slide.

Any Key

: allows you to answer an incoming call by pressing any key

on your phone.

Auto Reply

: allows you to create a text message to be sent when you

miss an incoming call.

Call Status Tones

: allows you to activate an alert tone for one of three

available status categories. Use the

Up

or

Down

Navigation key to

highlight your selection. Press the

key to make your selection. Press

the

Save

soft key to save your new selection. Options include:

Call Connect Tone

: allows you to activate an alert tone when the a

connection has been made.

Minute Minder

: allows you to activate an alert tone which sounds

every minute the call is active.

Call End Tone

: allows you to activate an alert tone when the line is

disconnected.

a777.book Page 84 Friday, September 26, 2008 4:08 PM

Advertising
This manual is related to the following products: