Samsung DVDV3650V-XAX - Manual (Page 15)

29 28
If your A/V receiver is equipped with a DTS decoder, your DVD-
VCR can output DTS digital sound, but you MUST enable this
feature in the menu system.
NOTE: Select “On” ONLY if you have connected a DTS-equipped
A/V receiver to the DIGITAL AUDIO OUT (optical or coaxial) on
the DVD-VCR back panel.
1 Open “MENU”
Press the MENU button while the DVD is in Stop mode.
2 Select “DVD”
Use the UP/DOWN buttons to highlight “DVD ”, then press the
ENTER button.
3 Select “Audio ”
Highlight “Audio”, then press the ENTER button.
4 Set “DTS”
Highlight “DTS”, then press the RIGHT button to select one
of the following options:
• Off - To use your DVD/TV with an A/V receiver NOT equipped
with a DTS decoder.
• On – To use your DVD/TV with an A/V receiver equipped with a
DTS decoder.
DTS
PCM Down Sampling : On
Dynamic Compression
Dynamic Compression restrains the dynamic range of sound, i.e.
the difference between the loud and quiet passages of a DVD audio
track.
1 Open “MENU”
Press the MENU button while the DVD is in Stop mode.
2 Select “DVD”
Use the UP/DOWN buttons to highlight “DVD ”, then press the
ENTER button.
3 Select “Audio”
Highlight “Audio”, then press the ENTER button.
4 Set “Dynamic Compression”
Highlight “Dynamic Compression”, then press the RIGHT button to
select one of the following options:
• On - This will compress the total dynamic range of the DVD
audio, making quiet passages in the audio signal louder and
loud passages softer.
• Off – This will preserve the original dynamic range.
PCM Down Sampling : On
Off
On
Off
On
Language : English
Front Display : Auto
Auto Power Off : Off
Language : English
Front Display : Auto
Auto Power Off : Off
00215A DVD-V3650/XAA-Eng2 5/29/03 2:45 PM Page 28