ACDelco AC-G0002 User Manual
Page 17
![background image](/manuals/42239/17/background.png)
Connect only electrical devices that are in good working order. Faulty devices or power cords present the risk of electrical shock.
Immediately turn off and disconnect any device that commences to operate abnormally, sluggish or abruptly stops. Determine if the
problem was the device or the rated load capacity of this generator has been exceeded.
NOTE: Plug appliances into the correct outlet. Connect standard 120 Volt, single phase, 60 Hz loads to the 120 Volt outlet. Connect 240/120Volt,
single phase, 60Hz loads with a NEMA L14-30 plug only to the 240/120 Volt outlet. See Figure 8 for an illustration of these outlets.
Even though this ACDelco AC-G0002 Portable Generator has an overall rated wattage of 3000, do not attempt to draw more than 3400
Watts (20 A) from any ONE of the 120 Volt outlets. Draws higher than 3400 Watts (20 A) will damage this generator and void the warranty.
3. Switch the circuit breaker to the “on” position.
NOTE: While this generator is running, power is available from either the standard 120 Volt outlets or the 240/120 Volt NEMA outlet. Both 120 Volts
and 240 Volts can be simultaneously drawn from this generator.
4. Turn on the connected electrical devices beginning with the device with the highest rated wattage requirement and then each additional device
with the next lower rated wattage requirement.
Do not connect 50Hz or 3-phase loads to this generator.
Figure 8 - Outlets Available on this Generator, from left to right,
12V DC, 120V AC, and 240/120 AC (NEMA L14-30 plug).
Model AC-G0002 3500 Surge Watts / 3000 Running Watts Portable Generator
17