Samsung BD-F7500-ZA - Manual (Page 24)

Settings
Audio
dTS Neo:6 Mode
You can enjoy multichannel sound via HDMI output from
a 2 channel audio source.
Audio Sync
In some cases when the product is connected to a
digital TV, the audio signal may not synchronize with the
video signal. If this occurs, adjust the audio delay time
to match the video signal.
• You can set the audio delay time between 0 msec
and 200 msec.
Adjust it to the optimal setting.
|NOTES |
\ The audio delay time you specify may not be exact depending
on the played content.
HdMI Audio Output
Set HDMI audio to output through HDMI1 or HDMI2.

Auto : Audio output will be set automatically based
on the devices connected to HDMI1 and HDMI2.

HdMI1 : Audio will output to the device connected to
HDMI1.

HdMI2 : Audio will output to the device connected to
HDMI2.
Speaker Settings
Lets you select the kind, size, and number of speakers
you have attached to your player, adjust the following
speaker settings for the speakers attached, and turn the
test tone on and off so you can test the speakers.

Size : Lets you select the size of each kind of
attached speaker - Large or Small - or indicate that
you don't have a particular kind of speaker attached
by selecting None. If you select None for a kind of
speaker, that kind of speaker will be grayed out on
the Level and Distance screens.

Level : Lets you adjust the relative loudness of each
speaker from 0dB to -6dB. For example, if you like
deep bass, you can increase the loudness of the
subwoofer by 6dB.

distance : Lets you adjust the relative distance of
each speaker from the listening position up to 30 feet.
The farther the distance, the louder the speaker will
be.

Test Tone : Lets you run the Test Tone function so
you can test your adjustments. Setting Test Tone to
On turns the Test Tone on. Setting it to Off turns it off.
|
24
English