Samsung RH269LBSH-XAA - Manual (Page 51)

51
USER INTERFACE
- Power saving mode : The I.C.E. PAD screen turns off, but the I.C.E. PAD remains on.
- If you choose midnight off mode, the I.C.E. PAD screen turns off from 1:00 to 5:00AM.
[Main screen] [Setting-Screen mode]
Screen
- This menu displays the I.C.E. PAD user screen properties including brightness, touch point settings and
power saving time settings.
How to control screen brightness
1. Choose the "Settings" icon on the main screen, and then it will change to Screen.
2. Control the screen brightness using the "
" button.
- To apply your new settings, press "Apply" button( ).
[Touch point reset mode]
How to calibrate the touch point
- This function can be used to calibrate the stylus pen touch point to
improve usability with the Touch screen.
1. Press the "Touchpoint" button ( ), and then a screen will
appear with pointer instructions on the top.
2. Hold the pen softly and press down lightly on the center of the
"+"mark. Repeat as the "+" mark moves on the screen.
3. To save the new calibration data, touch the LCD screen within 30
seconds.
- To keep the current setting, wait for 30 seconds.
How to set power saving time.
- In this mode, you can set a time for the screen to shut off after the
last button press. This helps to save power.
1. Press the "Change" button ( ), and then a pop up window is
displayed.
2. Choose the desired time. (After 1hr, After 30min, After 10min, After
5min, After 3min, Always on, Midnight off)
- The default setting is always on.
3. To apply your new settings, press "Apply" button ( ).
Setting.
NOTE
SAFETY W
ARNING
SIGNS
OPERA
TING INSTR
UCTIONS
DA99-01278D REV(0.0) 2006.10.17 10:9 PM 페이지51