Samsung LS23EMNKUYD-ZA User Manual
Page 36
3-4
Using the Product
Picture Options
•
<Color Tone>
The tone of the color can be changed.
•
<Cool> - <Normal> - <Warm1> - <Warm2>
•
<Warm1> or <Warm2> is only activated when the picture mode is <Movie>.
•
Settings can be adjusted and stored for each external device you have connected to an
input of the TV.
•
<Size>
You can switch the Size.
The direct button on the remote control is [P.SIZE] button.
•
<16:9> - Sets the picture to 16:9 wide mode.
•
<Zoom1> - Magnifies the size of the picture on the screen.
•
<Zoom2> - Magnifies the size of the picture more than <Zoom1>.
•
<Wide Fit> - Enlarges the aspect ratio of the picture to fit the entire screen.
•
<4:3> - Sets the picture to 4:3 normal mode.
•
<Screen Fit> - Use the function to see the original image with no cut-off with HDMI (720p/ 1080i
/ 1080p), Component (1080i / 1080p) or DTV (1080i) input signals.
•
After selecting <Zoom1>, <Zoom2> or <Wide Fit>: Press the ▲or▼ button to select
<Position>, then press the [
] button. Press the ▲or▼ button to move the picture up
and down.
•
Reset : Press the ▲or▼ button to select Reset , then press the [
] button. You can
initialize the setting.
•
Settings can be adjusted and stored for each external device you have connected to an
input of the TV.
•
<TV>, <Component> (480i,480p)
- <16:9>, <Zoom1>, <Zoom2>, <4:3>
•
<DTV> (1080i), <Component> (1080i, 1080p) ,<HDMI>(720p,1080i,1080p)
- <16:9>, <Wide Fit>, <4:3>, <Screen Fit>
•
<Digital NR>
Digital Noise Reduction.
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction
feature to help reduce any static and ghosting that may appear on the screen.
•
<Off> - <Low> - <Medium> - <High> - <Auto>
•
<HDMI Black Level>
You can directly select the black level on the screen to adjust the screen depth.
This function is active only when the external device is connected via <HDMI>.The <HDMI
Black Level> function may not be compatible with all external devices.
•
<Normal> - <Low>
•
<Film Mode>
The <Film Mode> feature offers you a theater-quality viewing experience.
<Film Mode> is supported in <TV>, <Component> (480i / 1080i) and <HDMI>(480i / 1080i)
•
<Off> - <Auto>
Picture Reset
Picture parameters are replaced with the factory default values.
•
<Reset Picture Mode> - <Cancel>
MENU
DESCRIPTION