Samsung HLR5677WX-XAA - Manual (Page 13)

Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment,
such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable).
Viewing Position
To optimize your viewing comfort, please follow the guidelines below for viewing distance.
If viewing for an extended period of time, sit as far back from the screen as possible.
Setting the Signal Source
1
Press the MENU button. Press the
ENTER button to select “Input”.
2
Press the ENTER button to select
“Source List”. Press the … or † button to
select a signal source, then press the
ENTER button.
●
When you connect equipment to the TV,
you can choose between the following
sets of jacks: “AV1”, “AV2”, “S-Video1”,
“S-Video2”, “Component1”,
“Component2” or “HDMI/DVI” on the
TV’s rear panel and “AV3” or “S-Video3”
on the TV’s side panel.
●
HDMI input can be selected only when
the external device is turned on and
connected to the TV.
Input
Source List : TV √
Edit Name √
Anynet
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
Alternate method
Press the SOURCE button on the remote
control repeatedly to select an external signal
source.
AV1
Source List
TV
AV1 ----
AV2 ----
AV3 ----
S-Video1 ----
S-Video2 ----
▼ More
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
English-13
BP68-00461A-00Eng_1206 12/6/04 12:39 PM Page 13