Samsung WB09H7300GP-A1 - Manual (Page 30)

English - 30
Water level and temperature
For economic and effective washing, specify a proper water level and a water supply type.
The default water level is High, and the default supply type is Hot water.
• Press the Water Level/Temp. button to select a water level and a water supply type:
High/Cold > High/Hot > Mid/Cold > Mid/Hot > Low/Cold > Low/Hot > High/Cold
• If you change the water level before the water fills up to the preset level, the washing time
changes accordingly.
CAUTION: To prevent damage to clothing, check the care label on the clothing.
Child Lock
Child Lock is designed to prevent children from accidently starting, stopping, or resetting the
washer.
• Once the Child Lock is set, it remains set until you release it manually. Turning off the washer
will not release this function.
• Press and hold the START/PAUSE button for more than 3 seconds to set or release the Child
Lock. The Child Lock indicator turns on or off accordingly.
Mute
• When the washer enters the mute mode, the Mute indicator turns on.
• Press and hold both the Water Level/Temp. and the Soak buttons to mute or unmute the
washer.
Self Clean
We recommend that you clean the tub using the Self Clean cycle regularly for hygienic reasons.
1. Press the POWER button.
2. Press the Course (Cycle) button to select Self Clean.
3. Press the Water Level/Temp. button. By default, the water level is fixed to Mid. You can select
only hot or cold water.
4. Press the START/PAUSE button.
CAUTION: Do not use any cleaning agents to clean the drum. Chemical residues in the
drum degrade washing performance.
Untitled-2 30 2014-05-26 �� 10:51:14