Samsung LS27A850DS-ZA - Manual (Page 54)

54
Setup and Reset
6
6 Setup and Reset
6 The selected option will be applied.
Configuring Backlight
1
Press [ ] on the product.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3
Press [ ] to move to ECO and press [ ] on the product.
4 Press [ ] to move to Backlight and press [ ] on the product.
The following screen will appear.
z
Off : Turn off the screen and activate DPMS mode. If Off is selected, it takes several seconds for
the monitor to detect movement and turn on after it turned off.
z
Dimming : Reduce the brightness of the screen (still turned on).
5 Press [ ] to move to the option you want and press the [ ].
6
The selected option will be applied.
z
The performance of Eco Motion Sensor is maximized to a specific user distance (1m) and angle
(40 degrees).
z
The sensor may not detect you if you are motionless.
z
If you think that the mode entry message appears too frequently, increase the time setting of the
Eco Motion Sensor or turn the Eco Icon Display Off .
z Avoid using radio equipment such as a walkie-talkie near the product as this may cause a product
malfuction.
Return Enter Move
: 5 Min

ECO
Eco Motion Sensor
೛Backlight
Eco Light Sensor
೛Sensitivity
೛Brightness Level
Eco Saving
Eco Icon Display

Off
Dimming
Off
Off