Samsung CL29Z30PQTXXAX - Manual (Page 14)

English-14
1. Press the PRE-CH button.
The TV will switch to the last channel viewed.
➢
To quickly switch between two channels that are far apart, tune to one channel,
then use the number button to select the second channel. Then use the PRE-CH
button to quickly alternate between them.
Using the PRE-CH Button to select the Previous Channel
1. Press the number buttons to go directly to a channel.
For example, to select channel 27, press “2,” then “7.”
The TV will change channels when you press the second number.
Using the Number Buttons
Use the number buttons to quickly tune to any channel.
1. To select a channel over 100, for channel 122, press “-”, then “2”, then “2”.
Using the “-” Button
Changing Channels
1. Press the CH or CH button to change channels.
➢
When you press the CH or CH button, the TV changes channels in
sequence.
You will see all the channels that the TV has memorized. (The TV must have
memorized at least three channels). You will not see channels that were either
erased or not memorized. See page 16 to memorize channels.
Using the Channel Buttons
1. Press the MENU button to display the menu.
Press the … … or † † button to select “Setup”, then press the ENTER button.
2. Press the … … or † † button to select “Plug & Play”, then press the ENTER
button.
For further details on setting up options, refer to the previous page.
➢
Plug & Play can only be accessed in the TV mode.
If you want to reset this feature...
Plug & Play
Move Enter Return
Setup
Time √ √
Plug & Play √ √
Caption √ √
Language : English √ √
† † More
TV
AA68-03806A-00Eng_√ч¡ж 3/27/06 1:37 PM Page 14