Samsung WA50F9A7DSP-A2 - Manual (Page 24)

24_ washing a load of laundry
washing a load of laundry
• If light from a light bulb, fluorescent bulb, or lamp is reflected on the display panel of
the washing machine, the smartphone may not be able to recognize the panel or error
message easily.
• If you hold the smartphone at too large an angle relative to the front of the display panel,
it may not be able to recognize the error code. For best results, hold the smartphone so
that the front of the panel and the smartphone are parallel or nearly parallel.
Washing clothes using the cycle selector
Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control”
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Press the Power button.
2. Open the lid.
3. Load the articles of clothing one at a time loosely into the drum, without overfilling it.
4. Add liquid (or powder) detergent, softener, and/or bleach (if necessary) to the appropriate
compartments. See pages 25~27.
5. Close the lid.
6. Use the Cycle Selector to select the appropriate cycle according to the type of material:
Normal, Heavy Duty, Colors/Darks, Towels, Infant Wear, Deep Clean (WA50F9A7D), Sanitize
(WA50F9A8D), Bedding, Pure Cycle TM , Perm Press, Active Wear, Delicates/Hand Wash,
Wool, Quick Wash, Spin, Rinse+Spin. The relevant indicators will illuminate on the control
panel.
7. At this time, you can control the wash temperature, the number of rinse cycles, the spinning
speed, and the delay time by pressing the appropriate option button.
8. Press the Start/Pause button on the Cycle Selector and the wash will begin. The process
indicator will light up and the remaining time for the cycle will appear in the display.
Pause Option
To remove or add laundry items, follow these steps:
1. Press the Start/Pause button to unlock the lid.
The lid cannot be opened when the water is too HOT.
2. Remove or add laundry items.
3. Close the lid, and then press the Start/Pause button to restart the wash.
If you have Child Lock on, you must deactivate it first. See page 21.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the lid.
2. Remove laundry.
ATC (AuTo TEMPERATuRE ConTRoL)
ATC is the control function that the washer controls water temperature with temperature sensor (thermistor).
Because there are numerous water temperatures depending on the customer’s environments(cold
areas, warm areas, various water temperature, settings of heater temperature, etcs), ATC function in
our washer maintains the certain level of wash temperature to output the best washing performance at
each cycle.
If you select normal & heavy duty course, those courses are the regulation and UL course. Since new
washer must reduce the amount of energy usage at first priority, customer will notice more cold water
entering the washer. But This is Normal, not a problem.
In those regulation course, Hot temperature is similar to acceptable adult bath-water temperature and
warm temperature is similar to comfortable swimming-pool water temperature.
If customer want to wash clothes in specific water temperature, customer should choose a different
course at each temperature(Hot/Warm/Eco Warm)
F900A WASH_WA50F_USER MANUAL_DC68-03133H-04_EN.indd 24 2014-3-1 15:08:21