Samsung HLR6168WX-XAC - Manual (Page 139)

English - 139
NOTES
• Be sure the replacement Lamp is the same type.
• After replacing the lamp, align the lamp cover with the groove and secure the screws.
• The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective
circuit).
• For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves.
1 Unplug TV, then use a
screwdriver to remove the
screws.
2 Remove the Lamp cover.
3 Remove the screw securing
the Lamp by using a
screwdriver.
4 Separate the Lamp from the
engine by holding the handle
and pulling it out.
5 To reinstall the Lamp, follow
these steps in reverse order.
BP68-00520A-00Eng(126~143) 6/3/05 3:58 PM Page 139