Samsung DVD-HD870-XAA - Manual (Page 16)

ENG-16
C
O N N E C T I O N S
Connecting to a TV with DVI Jack
1
Using an HDMI-DVI cable (not included), connect the HDMI
OUT terminal on the rear of the DVD player to the DVI IN
terminal of your TV.
2
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO
(red and white) IN terminals of your TV.
Turn on the DVD player and TV.
3
Press the input selector on your TV remote control until the DVI
signal from the DVD player appears on your TV screen.
HDMI VIDEO Specifications
When you press the HDMI SEL. button, the 480p, 720p, and 1080i resolutions are selected in order.
The first press of the HDMI SEL. button, brings up the current resolution.
The second press allows you to change the HDMI output resolution.
- Depending on your TV, certain HDMI output resolutions may not work.
- Please refer to the user's manual of your TV.
- If HDMI or HDMI-DVI cable is plugged into TV, the DVD player’s output is set to HDMI automatically about 10
seconds later.
- For better picture quality, set the HDMI output resolution to 720p or 1080i .
- If you set the HDMI output resolution to 720p or 1080i, the S-Video output will not output video.
RED WHITE
RED WHITE
Audio Cable
HDMI-DVI cable
(Not Included)
Connecting to a TV with HDMI Jack
1
Using an HDMI-HDMI cable connect the HDMI OUT terminal on
the rear of the DVD player to the HDMI IN terminal of your TV.
2
Press the input selector on your TV remote control until the
HDMI signal from the DVD player appears on your TV screen.
HDMI cable