Samsung SCH-U380HKAVZW - Manual (Page 36)

Call Functions 31
Enable Driving Mode with a Voice Command
1. From the Home Screen, press the Voice
Commands key.
2. At the audio prompt, say “Driving Mode On”. Driving Mode
is activated and set to Caller ID only.
Enable Driving Mode in Settings
1. From the Home Screen, press the Settings ➔ Sounds
Settings.
2. Touch Driving Mode and select:
• Caller ID Only: Reads Caller ID for incoming calls and messages.
• ID & Message: Reads Caller ID and the message content for
incoming messages.
• Off: Disable Driving Mode.
Roaming
What is Roaming?
When you travel outside your home network’s coverage area,
your phone can roam to acquire service on other compatible
digital networks. When roaming is active, the roaming icon
appears in the Annunciator line.
During roaming, some services may not be available. Depending
on your coverage area and service plan, extra charges may apply
when making or receiving calls.
Note: Contact Verizon Wireless for more information about your coverage
area and service plan.
You can choose settings for system selection and roaming. For
more information, see “System Select“ on page 66.
TTY Mode
Your phone is TTY-compatible, allowing you to connect TTY
equipment to the phone’s headset jack. For more information
about TTY settings, see “TTY Mode“ on page 67.