Samsung SGH-T729ZKATMB - Manual (Page 88)

85
4. At the voice prompt, press the Settings soft key and select one of the
following:
• Choice lists
- Automatic: VoiceSignal displays a choice list only when it is not sure if it has
correctly recognized the name or number.
- Always On: VoiceSignal always displays a choice list, even when there is only
one choice.
- Always Off: VoiceSignal never displays a choice list.
5. Press the Select soft key or the key to confirm the selection.
Sensitivity
This option allows you to adjust the sensitivity monitoring of voice tones.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Fun & Apps and press the Select soft key or the key.
3. Highlight Voice recognition and press the Select soft key or the key.
4. At the voice prompt, press the Settings soft key, select Sensitivity and
press the Select soft key or the key.
5. Use the Up or Down Navigation keys to adjust the selected Sensitivity
setting to Reject More spoken commands or names or to Reject Less
spoken commands or names.
6. Press the OK soft key to accept the new setting.
Digit dialing
If VoiceSignal frequently does not recognize your commands, adapting digit dialing
to your voice improves the accuracy of digit recognition.
After you adapt Digit Dial, your phone recognizes only your voice. Other users are not
able to use the handset with VoiceSignal unless the handset is reset to factory
defaults.
Adapting requires recording multiple sequences of digits. The entire adaptation
process takes approximately one minute.