Samsung LS19CFNKFYB-ZA User Manual

Page 37

Advertising
background image

English - 35

Problem

Possible Solution

Black bars on the screen.

Make sure the broadcast you’re receiving is High Definition (HD).

HD channels sometimes broadcast Standard Definition

(SD) programming, which can cause black bars.

Set your cable/satellite box to stretch or widescreen mode

to eliminate the bars.

Picture has a Red/Green or Pink tint. Make sure the Component cables are connected to the correct jacks.
Closed Captioning not working.

If you are using a Cable/Satellite box, you must set Closed

Captioning on the box, not your TV.

Snowy picture.

Your cable box may need a firmware upgrade. Please

contact your Cable company.

Ghosting on picture.

This is sometimes caused by compatibility issues with your cable box.

Try connecting Component cables instead.

Screen is black and power indicator

light blinks steadily.

On your computer check: Power, Signal Cable.

The TV is using its power management system.

Move the computer's mouse or press any key on the keyboard.

Image is not stable and may

appear to vibrate when you have

a computer connected to the PC

input.

If the setting is not correct, use your computer utility

program to change the display settings.

Your TV supports multiscan display functions within the

following frequency domain:

- Horizontal frequency (kHz): 30 ~ 81 kHz

- Vertical frequency (Hz): 56 ~ 75 Hz

- PC Maximum refresh rate (at 60 Hz): 1360 X 768

Image is not centered on the

screen.

Adjust the horizontal and vertical position.

The screen position must be adjusted on the output source

(i.e. STB) with a digital signal.

The picture appears distorted in the

corner of the screen.

If “

Screen Fit” is selected with some external devices, the

picture may appear distorted in the corner of the screen.

This symptom is caused by the external devices, not TV.

The ‘Resets all settings to the

default values.’ message appears.

This appears when you press and hold the

EXIT button for a

while. The product settings are reset to the factory defaults.

This TFT LCD panel uses a panel consisting of sub pixels (3,133,440) which require

N

sophisticated technology to produce. However, there may be few bright or dark pixels on the

screen. These pixels will have no impact on the performance of the product.

BN59-00905F_eng.indd 35

2009-11-10 9:30:45

Advertising
This manual is related to the following products: