Samsung LS19CFNKFYB-ZA - Manual (Page 21)

English - 19
Setting up the TV with your PC ¦
Preset: Press the N SOURCE button to select PC mode.
magicBright : ❑ Entertain / Internet / Text / Dynamic Contrast / Custom
MagicBright is a feature providing optimum viewing environment depending on the contents of
the image you are watching. Currently five different modes are available: Entertain, Internet, Text,
Dynamic Contrast and Custom. Each mode has its own pre-configured brightness value.
Contrast / Brightness / Sharpness ❑
Contrast: Adjusts the contrast level of the picture. •
Brightness: Adjusts the brightness level of the picture. •
Sharpness: Adjusts the edge definition of the picture. •
Auto Adjustment
❑
Use the Auto Adjust function to have the TV set automatically
adjust the video signals it receives. The function also
automatically fine-tunes the settings and adjusts the frequency
values and positions.
Press the T TOOLS button to display “Tools” menu. You can
also set the Auto Adjustment by selecting “ Tools → Auto
Adjustment”.
This function do work in PC mode only
N
Screen ❑
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not
removed by fine tuning alone, then make the vertical frequency adjustments on your PC and fine tune
again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of the
screen.
Coarse / Fine
„
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed
by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the
noise has been reduced, readjust the picture so that it is aligned on the center of screen.
PC Position
„
Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to
adjusting the Vertical-Position. Press the ◄ or ►button to adjust the Horizontal-Position.
Image Reset
„
You can replace all image settings with the factory default values.
Picture Options ❑
Color Tone : Cool / Normal / Warm / Custom „
R-Gain / G-Gain / B-Gain „
R-Gain: Adjusts the red color brightness. N
G-Gain: Adjusts the green color brightness. N
B-Gain: Adjusts the blue color brightness. N
Size: 16:9 / 4:3
„
Alternately, you can press the O P.SIZE button on the remote control repeatedly to change the
picture size.
16:9 : Sets the picture to 16:9 wide mode. N
4:3 : Sets the picture to 4:3 normal mode. N
Reset : Reset Picture mode / Cancel ❑
Resets all picture settings to the default values.
Reset Picture Mode: Current picture values return to default settings. N
Brightness : 45
Sharpness : 50
Auto Adjustment ►
Screen
Advanced Settings
Picture Options
Picture Reset
Picture
BN59-00905F_eng.indd 19 2009-11-10 9:30:42