APC RAID Subsystem SCSI-SATA II - Manual (Page 37)

- 37 -
1. Click “ ” in Auth column.
2. Select “CHAP”.
3. Go to \iSCSI config\CHAP account to create account and password.
Select “None” to disable the authentication method.
3.5.4 Session
Enter “Session” function, it will display iSCSI session and connection
information, including the following items:
1. Host (Initiator Name)
2. Security Protocol
3. TCP Port Number
4. Error Recovery Level
5. Error Recovery Count
6. Detail of Authentication status and Source IP: port number.
Figure 3.5.4.1
3.5.5 CHAP account
Enter “CHAP account” function to create a CHAP account for authentication.
Tips
After setting CHAP, the initiator in host/server should be set the
same Account/Password. Otherwise, user cannot login.