Samsung HW-E450-ZA - Manual (Page 22)


Insert a USB drive containing the firmware upgrade into the USB port on the back of the main unit.
Please be careful to not disconnect the power or remove the USB drive while upgrades are being
applied. The main unit will turn off automatically after completing the firmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can easily reset them after the upgrade.
If the firnware fails to upgrade, we recommend formatting the USB data in FAT16 and trying again.
For upgrading purposes, do not format the USB drive in NTFS format because it is not a supported file system.
Depending on the manufacturer, the USB may not be supported. ▪
▪
▪
▪
▪
sOftWare UPgraDe
Samsung may offer upgrades for the Crystal
Surround Air Track's system firmware in the future.
If an upgrade is offered, you can upgrade the
firmware by connecting a USB drive with the
firmware upgrade stored on it to the USB port on
your Air Track.
Note that if there are multiple upgrade files, you must
load them onto the USB drive singly and use them to
upgrade the firmware one at a time.
Please visit Samsung.com or contact the Samsung
call center to receive more information about
downloading upgrades files.
POWER TV POWER
AH59-02434A
SAT MUTE SMART
VOLUME S/W LEVEL AUDIO SYNC
SAT SOURCE SOUND SPEAKER
DIMMER AUTO POWER
TV INFO TV SOURCE
TV VOL TV VOL
TV CH
TV CH
TV PRE-CH TV EXIT
DRC REPEAT
3D SOUND
VOLUME
EFFECT
TV MUTE
POWER TV POWER
AH59-02434A
SAT MUTE SMART
VOLUME S/W LEVEL AUDIO SYNC
SAT
SOURCE SOUND SPEAKER
DIMMER AUTO POWER
TV INFO TV SOURCE
TV VOL TV VOL
TV CH
TV CH
TV PRE-CH TV EXIT
DRC REPEAT
3D SOUND
VOLUME
EFFECT
TV
MUTE
5v 500mA
5v 500mA
SpeAKeR button
This button enables you to select between listening to audio from your
TV or audio from the Air Track when connected via HDMI.
Press SpeAKeR on the remote control of this unit.
aUDiO MODe sPeaKer scroll Display Display
HDMi in
tV TV SPEAKER TV SPK
air track AVR SPEAKER HDMI
arc
tV TV SPEAKER S MUTE
air track AVR SPEAKER TV ARC
Using the tV functions
1. Press tV SoURCe on the remote control of this unit.
2. Press tV InFo on the remote control to display the TV channel
information.
3. Press tV CH on the remote control to select the TV channel.
4. Press tV Vol on the remote control to increase or decrease the volume
level.
5. Use tV pRe-CH button to move to the previous TV channel in TV
mode.
6. To exit the TV menu, use the tV exIt button. (Functions same as the
EXIT button of the TV remote control)
The remote control can operate TVs made by SAMSUNG only. ▪
POWER TV POWER
AH59-02434A
SAT MUTE SMART
VOLUME S/W LEVEL AUDIO SYNC
SAT SOURCE SOUND SPEAKER
DIMMER AUTO POWER
TV INFO TV SOURCE
TV VOL TV VOL
TV CH
TV CH
TV PRE-CH TV EXIT
DRC REPEAT
3D SOUND
VOLUME
EFFECT
TV MUTE
POWER TV POWER
AH59-02434A
SAT MUTE SMART
VOLUME S/W LEVEL AUDIO SYNC
SAT
SOURCE SOUND SPEAKER
DIMMER AUTO POWER
TV INFO TV SOURCE
TV VOL TV VOL
TV CH
TV CH
TV PRE-CH TV EXIT
DRC REPEAT
3D SOUND
VOLUME
EFFECT
TV
MUTE