Samsung EC-WB200FBPWUS - Manual (Page 82)

Shooting options 81
Using burst modes
It can be difficult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. Also, it can be difficult to adjust the
exposure correctly and select a proper light source. In these cases, select one of the burst modes. You can also set the timer to delay shooting.
3
Align your subject in the frame, and then half-press [Shutter] to
focus.
4 Press and hold [Shutter].
• While you are pressing [Shutter], the camera captures photos
continuously
• Available options may differ depending on the shooting conditions.
• When you select Motion Capture, your camera will set the resolution to
and set the ISO sensitivity to Auto.
• Depending on the Face Detection options you selected, some Shooting options
may not be available.
• It may take longer to save the photos depending on the memory card capacity
and performance.
• In some modes, you can also set the shooting option by pressing [ ], and
then selecting Drive/Timer.
Capturing continuous photos
1
In Shooting mode, press [ ].
2
Select an option.
Icon Description
Single: Capture a single photo. (Single is not a burst option.)
Continuous:
• While you are pressing [Shutter], the camera continuously
captures photos.
• The maximum number of photos depends on the capacity of your
memory card.
Motion Capture: While you are pressing [Shutter], the camera
captures photos (5 photos per second; maximum of 30
photos).