Samsung CW25M064N2XXEC - Manual (Page 4)

English - 4
You can exclude channels you
have chosen from the channels
you scanned. When you scan
through the stored channels,
those you have chosen to skip
are not displayed. All of the
channels that you did not
specifically choose to skip are displayed during scanning.
Method:
ENTER
➜ …/† ➜ ENTER : Select Added or Deleted.
Channel - Add/Delete
This operation allows you to
change the programme numbers
of stored channels. This
operation may be necessary
after using auto store.
◆ From: Channel number to
be changed.
◆ To: New channel number to be identified.
◆ Store: Confirmation the exchange of channel numbers.
Channel - Sort
Move Enter Return
… … More
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
P 5 : Added
† † More
Add/Delete TV
Move Adjust Return
From : P 1 -----
To : P-- -----
Store : ?
Sort TV
Channel - Manual Store
You can store channels,
including those received via
cable networks. When storing
channels manually, you can
choose:
- Whether or not to store each
of the channels found
- The programme number of each stored channel which
you wish to identify
◆ Programme (Programme number to be assigned to a
channel)
◆ Colour System: AUTO/PAL/SECAM/NTSC4.43
◆ Sound System: BG/DK/I/L
◆ Search (When you do not know the channel numbers):
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
the screen.
◆ Channel (When you know the number of the channel to
be stored)
➢
You can also select the channel number directly by
pressing the numeric buttons (0~9).
◆ Store (When you store the channel and associated
programme number)
➢
If there is no sound or abnormal sound, re-select the
sound standard required.
☛
Channel mode
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You
can select a channel by entering the position number
in this mode.
◆ C (Real channel mode): You can select a channel by
entering the assigned number for each air
broadcasting station in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel
in this mode.
Move Adjust Return
Programme : P 3
Colour System : AUTO √ √
Sound System : BG √ √
Search : 46MHz
Channel : C 1
Store : ?
Manual Store TV You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or
desired programme numbers. However you can sort
numbers manually and clear any channels you do not wish
to watch.
Channels are sorted and stored
in the order which reflects their
position in the frequency range
(with lowest first and highest
last). The programme originally
selected is then displayed.
➢
To stop the search before it
has finished, press the
ENTER button.
When finished, the Sort menu
is displayed. To sort the stored
channels into the desired
numerical order, refer to
“Channel - Sort”. To exit without sorting, press the EXIT
button.
Channel - Auto Store
Move Enter Return
Country : Belgie
Search
Auto Store TV
Search
Enter Return
Stop
P 1 C-- ----- 102MHz
7 %
Belgie
Deutschland
España
France
Italia
Nederland
Schweiz
† †
If the reception is clear, you do not have to fine-tune the
channel, as this is done automatically during the search and
store operation. If however the signal is weak or distorted,
you may have to fine-tune the channel manually.
Method:
œ/√ : You can obtain a sharp
and clear picture and good
sound quality.
…/†
➜ ENTER : You can reset
the setting.
MENU : You can memorise adjusted picture or sound.
Channel - Fine Tune
Fine Tune
Move
Adjust Return
Reset
P 1 0
AA68-03621A-01Eng_euro 6/1/05 6:43 PM Page 4