Samsung NP-X22-K01-SEA - Manual (Page 138)

137
To view on the battery
Separate the battery and press the PUSH button inside
the battery. The remaining battery charge (%) will be
displayed.
Note
Battery Warning
■ You will hear an alarm when the remaining
battery charge reaches below 10%.
In this case, connect the AC adapter or turn off
the computer and install a fully charged battery.
■ If the battery residual amount is 3~5%, the
computer automatically shuts down after saving
the data. The battery residual amount may vary
depending on the computer model.
Battery Usage Time Information
A battery is an expendable supply, so when using it over
a long time, the capacity/battery life is shortened. If the
battery life is reduced to under half of its initial time, we
recommend purchasing a new battery.
For long periods of not using the battery, keep the battery
after discharging it. This extends the battery life time.
Charging the Battery
1
Attach the battery and connect the AC adapter to the
DC-in jack of the computer.
The battery will then start charging.
2
When charging is complete, the Charge LED turns
green.
Status Charge LED
Charging Red
Charging complete Green
AC adapter not connected Off
Measuring the Remaining Battery Charge
You can view the battery charge status by completing the
following procedures.
To use the shortcut key to view
Press the Fn + ( ) keys on the keyboard. The
remaining battery charge (%) will displayed for a moment.
You can only view the charge status in this way when
Easy Display Manager is installed on your computer.