Samsung SGH-T330ZKATFN - Manual (Page 70)

66
Note: Before enabling or disabling the PIN Check feature, you must enter your PIN.
The following options are available:
• Disable: the phone connects directly to the network when you switch it on.
• Enable: you must enter the PIN each time the phone is switched on.
Change PIN Code
This feature allows you to change your current PIN, provided that the Check PIN
code feature is enabled. You must enter the current PIN before you can specify a
new one.
Once you enter a new PIN, you are asked to confirm the PIN number by
re-entering it.
Set FDN Mode
FDN mode, if supported by your SIM card, allows you to restrict your outgoing calls
to a limited set of phone numbers. For more information, refer to “FDN Contacts”
on page 53.
To enable or disable FDN Mode, follow these steps:
1. In Idle mode, press Menu ➔ Settings ➔ Phone Settings ➔ Security ➔
Set FDN Mode.
2. Highlight Enable or Disable and press Select to save your setting. To Enable
FDN Mode, you are prompted to Enter PIN2 code.
Change PIN2 code
ᮣ In Idle mode, press Menu ➔ Settings ➔ Phone Settings ➔ Security ➔
Change PIN2 code.
Memory Status
Your phone displays information about the phone usage and memory available:
Shared Memory, Messages, Files, Games, Tools and Contacts.