Samsung BD-HM57C-ZA - Manual (Page 9)

9
Connecting to a Network Router
You can connect your player to your network router using one of the methods illustrated
below.
To use the DLNA network functionality, you must connect your PC to your network as
shown in the illustrations.
The connection can be wired or wireless.
Wired Network
Broadband
service
Broadband
service
Broadband modem
(with integrated router)
Broadband
modem
Router
Or
✎ NOTES
■
Internet access to Samsung's software update server may not be allowed, depending on
the router you use or your ISP's policy. For more information, contact your ISP (Internet
Service Provider).
■
DSL users, please use a router to make a network connection.
Wireless Network
Wireless Router
Broadband service
✎ NOTES
■
If your wireless router supports DHCP, this player can use a DHCP or static IP
address to connect to the wireless network.
■
Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.
■
The player supports only the following wireless security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
■
Select a channel on the wireless router that is not currently being used. If the
channel set for the wireless router is currently being used by another device
nearby, it will result in interference and communication failure.
■ In compliance with the newest Wi-Fi certification specifications, Samsung Blu-ray players
do not support WEP, TKIP, or TKIP-AES (WPS2 Mixed) security encryption in networks
running in the 802.11n mode.
■
Wireless LAN, by its nature, may cause interference, depending on the operating
conditions (router performance, distance, obstacles, interference by other radio
devices, etc).