Samsung LS24F9NSM-ZA User Manual
Page 34
3-4
Using the Product
Eco Solution
•
<No Signal Power Off>
Saves power by turning the TV off when no signal is received from any source.
•
<Off> - <15 min.> - <30 min.> - <60 min.>
Disabled when the PC is on DPM(Display Power Management).
Auto Adjustment
The values of <Fine>, <Coarse> and <Position> are adjusted automatically.
By changing the resolution in the control panel, auto function is performed.
Available only <PC> mode.
Press the [TOOLS] button to display the Tools menu. You can also set the <Auto Adjustment> by
selecting <Tools> → <Auto Adjustment>.
Screen •
<Coarse>
Removes noise such as vertical stripes.
<Coarse> adjustment may move the screen image area. You may relocate it to the center using
the horizontal control menu.
•
<Fine>
Removes noise such as horizontal stripes.
If the noise persists even after <Fine> tuning, repeat it after adjusting the frequency <Coarse>.
•
<Position>
Adjusts the screen location horizontally and vertically.
•
<Image Reset>
Image parameters are replaced with the factory default values.
Available only <PC> mode.
Picture Options
•
<Color Tone>
The tone of the color can be changed.
•
<Cool> - <Normal> - <Warm> - <Custom>
•
Available only <PC> mode.
•
Not available when <MagicBright> is <Dynamic Contrast>.
•
<R-Gain > - < G-Gain > - <B-Gain >
Adjusts the individual R, G, B (Red, Green, Blue) color controls.
Not available when <MagicBright> is <Dynamic Contrast>.
•
<Size>
You can switch the Size.
•
<16:9> - <4:3>
•
<Auto Protection Time>
Set the time the screen remains idle with a still image until the screen saver is activated. The
screen saver prevents the formation of ghost images on the screen.
•
<2 hours> - <4 hours> - <8 hours> - <10 hours> - <Off>
Picture Reset
Picture parameters are replaced with the factory default values.
•
<OK> - <Cancel>
MENU
DESCRIPTION