Samsung LS24A450BWT-GO - Manual (Page 54)

3-19 Using the product
INFORMATION
PC/AV Mode
Set to PC when connected to a PC.
Set to AV when connected to an AV device.
• This function does not support Analog mode.
• Supplied for the wide models only such as 16:9 or 16:10.
• If the monitor (when set to Digital) is in power saving mode or is displaying the message
<Check Signal Cable>, press the MENU button to display the On Screen Display (OSD).
You can select <PC> or <AV>.
Key Repeat Time
Controls the repeat delay of a button.
You can set to <Acceleration>, <1 sec> or <2 sec>. If <No Repeat> is selected, the button only
responds once.
Customized Key
You can set the function of the Customized Key to one of the following.
• < Angle> - < Bright> - <Eco Saving> - <Image Size>
Auto Source
• <Auto> - The monitor automatically selects an input signal.
• <Manual> - Users have to manually select an input signal.
Not applicable to analog (D-SUB)-or-digital (DVI)-dedicated models.
Display Time
The OSD automatically disappears if no action is taken by the user.
You can determine the time to wait before the OSD is hidden.
• <5 sec> - <10 sec> - <20 sec> - <200 sec>
Menu Transparency
You can select the transparency of the OSD.
•
<Off> - <On>
Menu Description
INFORMATION
Shows the frequency and resolution set on the PC.
For models with an Analog interface only, <Analog/Digital> is not shown in the <Information>.
Menu Description