Samsung LS17MEBSBD-XAA User Manual

Page 77

Advertising
background image

Signal Cable

15pin to 15pin D-sub cable, Detachable, 1.8 m
DVI-D to DVI-D connector, Detachable, 2.0 m (Option)

Signal Connectors

15pin 3-row D-Sub connector, 24pin 3-row DVI-D connector

Power Consumption

Less than 38 W

Dimensions (W x D x H) / Weight

422.7 x 62.5 x 360.2 mm / 16.6 x 2.4 x 14.1 inch (Without Stand) / 5.5 kg
422.7 x 219.3 x 427.9 mm / 16.6 x 8.6 x 16.8 inch (With Stand) / 7.7 kg

VESA Mounting Interface

75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.)

Environmental considerations

Operating

Temperature : 50 °F ~ 104 °F (10 °C ~ 40 °C)
Humidity : 10 % ~ 80 %, non-condensing

Storage

Temperature : -4 °F ~113 °F (-20 °C ~ 45 °C)
Humidity : 5 % ~ 95 %, non-condensing

Plug and Play Capability

This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and
computer systems will provide the best operating conditions and monitor settings. In most cases,
monitor installation will proceed automatically, unless the user wishes to select alternate settings.

Dot Acceptable

TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1 ppm
(one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color
seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and
you can use it without uneasiness.

For example, the number of TFT LCD sub pixels that is contained in this product are 3,932,160.

Design and specifications are subject to change without prior notice.

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy
by switching your monitor into a low-power mode when it has not been used for a certain amount of
time. The monitor automatically returns to normal operation when you press a key on the keyboard.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended
for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed
in your computer. Use a software utility installed on your computer to set up this feature.

State

Normal Operation

Power saving mode

Power off

(Power button)

EPA/ENERGY 2000

Power Indicator

Blue

Blue, Blinking

Black

Advertising
This manual is related to the following products: