Samsung DVD-S221-XAA - Manual (Page 44)

44
Setting Up the Audio Options
1 1
With the unit in Stop mode, press the SETUP
button.
2 2
Use the UP/DOWN buttons to select AUDIO
OPTIONS. Then press the ENTER button.
3 3 Use the UP/DOWN buttons to select the desired item.
Then press the LEFT/RIGHT buttons.
Digital Output
1. PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
N
N N O O T T E E : Be sure to select the correct Digital Output or
no audio will be heard.
DTS
1 . Off : Doesn’t output digital signal.
2 . On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
Dynamic Compression
1 . On : To select dynamic compression.
2 . Off : To select the standard range.
2X Scan Audio
1 . Off : Turns 2X audio off.
Though 2X Scan Audio is ON in the SETUP MENU,
no sound will be heard on discs which are recorded with
LPCM, DTS or MPEG-2 Audio.
2 . On : Turns 2X audio on.
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up; Press RETURN button.
• Manufactured under license from Dolby Laboratories.
”Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.