Samsung LS23NVTABW-ZA - Manual (Page 8)

1-3 Major Safety Precautions
Installation Related
Warning
Caution
Avoid placing burning candles, mosquito-
repellent or cigarettes on the product and
installing the product near a heater.
•
Otherwise, it may result in fire.
Ask an installation engineer or relevant
company to install the product onto the wall.
•
Otherwise, it may result in injury.
• Make sure to use the specified wall
mount.
Avoid installing the product in a badly-venti-
lated location such as inside a bookshelf or
closet.
•
Otherwise, it may result in fire due to
internal over-heating.
Keep a distance of at least 10 cm from the
wall when installing the product for ventila-
tion.
•
Otherwise, it may result in fire due to
internal over-heating.
Keep the plastic bags used to pack the
product away from children.
•
If children place the plastic bags over
their heads, they may suffocate.
Avoid installing the product in a location that
is unstable or exposed to excessive vibra-
tions such as on an unstable or slanted
shelf.
•
The product may fall and this may result
in damage to the product or injury.
• If you use the product in a location
exposed to excessive vibrations, it may
result in a problem with the product or
fire.
Avoid installing the product in a location
exposed to dust, moisture (sauna), oil,
smoke or water (rain drops) and installing it
within a vehicle.
•
This may result in electric shock or fire.
Avoid installing the product in a location
exposed to direct sunlight and installing the
product near a heat source such as a fire or
heater.
•
This may shorten the product life cycle
or cause fire.
Avoid installing the product at an easily
reachable height where children may reach
it.
•
If a child touches the product, the
product may fall and this may result in
injury.
• Since the front part is heavier, install the
product on a flat and stable surface.
Do not let the product drop while moving it.
•
This may result in a problem with the
product or injury.
Do not place the product face down on the
floor.
•
This may damage the panel of the
product.