Samsung SCH-U900ZKAVZW - Manual (Page 135)

Multimedia 132
Printing Pictures Using PictBridge
6. Highlight the desired image and press to place a check mark next to
the image selected. Repeat this step for any additional images you wish to
print.
7. Press the left soft key DONE. “CONNECT A USB CABLE” appears in the
display.
8. Insert the USB cable into your phone. The PRINT SETTINGS screen
appears in the display.
9. Highlight Copies and press the navigation key left or right to select the
desired number of copies to print.
10. Press the navigation key down to select Paper Size. Press the navigation
key left or right to select Default or whatever paper sizes are supported by
the printer.
Note: Paper sizes may vary and are dependent on the printer’s capabilities.
11. Press the navigation key down to select Type. Press the navigation key left
or right to select one of the following sizes:
• Default
• 1-Up
• Borderless
• 2-Up
• 4-Up
• Index
Note: These sizes may vary and are dependent on the printer’s capabilities.
12. Press the navigation key down to select Quality. Press the navigation key
left or right to select Default or one of the quality options supported by the
printer.
Note: Quality options may vary and are dependent on the printer’s capabilities.
13. Press the navigation key down to select Date Print. Press the navigation
key left or right to turn on or off.
14. Press PRINT to print the marked image(s).
15. Select Yes to confirm printing and press .
OK
OK
OK