Samsung SP0351VBX-ZA - Manual (Page 49)

Using 3-6
3-6 Firmware Update
Download the latest firmware version from the Samsung Electronics website (http://www.samsung.com) and install.
• As data saved in the internal memory can be deleted during an update, always back up your data.
• Only a USB memory device is supported for a firmware update.
• Do not remove an external (USB) memory device while an update is in progress.
• Do not operate any buttons during the update.
• Do not turn the projector off during the update.
• To confirm that the firmware has been successfully updated, go to <Settings> ĺ <Support> ĺ <Product Information>.
Before Firmware Update !
1. Prepare an external (USB) memory device.
2. Download the latest firmware for your projector model to your PC from the Samsung website.
3. Connect the USB memory device to the PC.
4. Copy the downloaded firmware to the USB memory device.
Updating the Firmware
1. Connect the USB memory device containing the latest firmware to the projector.
2. Select <
Settings > ĺ < Support > ĺ < Firmware Update > in the main menu page.
3. You will see the current firmware version and the latest firmware version available.
4. Select <Update Now> to begin.
5. After the firmware is updated, the projector is automatically powered off.
6. Power on the projector and check the firmware version.
Settings
Category Option
Firmware Update
Open Source License
Reset Settings
Product Information
General
Support
Category Option
Firmware Update
Open Source License
Reset Settings
Product Information
General
Support Firmware Update
Please, do not turn off the power.
The power will be off automatically
after update is finished.