Samsung HPR6372X-XAA - Manual (Page 10)

10
Rear Panel
ΠPOWER IN
Connect the supplied power cord.
´ SERVICE ONLY
Connector for service only.
ˇ HDMI/DVI IN
Connect to the HDMI jack of a device with
HDMI output.
These inputs can also be used as a DVI
connection with separate analog audio inputs.
An optional HDMI/DVI cable will be
necessary to make this connection.
When using the optional HDMI/DVI adapter,
the DVI analog audio inputs on your TV allow
you to receive left and right audio from your
DVI device. (Not compatible with PC)
¨ DVI AUDIO IN (AUDIO-L/R)
Connect to the DVI audio output jack of an
external device.
ˆ PC IN
Connect to the video output jack on your PC.
Ø PC AUDIO IN
Connect the audio output jack on your PC.
∏ OPTICAL DIGITAL AUDIO OUT
Connect to a Digital Audio component.
” COAXIAL DIGITAL AUDIO OUT
Connect to a Digital Audio component.
’ Anynet
Please refer to the Anynet Owner’s
Instruction. This jack is for connecting to
other Samsung Anynet-enabled devices.
˝ COMPONENT IN 1, 2
Video (Y/P
B
/P R ) and audio (L-AUDIO-R)
component inputs.
Ô ANT 1 IN (CABLE IN)/ANT 2 IN (AIR IN)
75 Ω Coaxial connector for Antenna/Cable
Network.
 AV 1 IN (AUDIO-L/R)
Audio inputs for external devices, such as
a camcorder or VCR.
Ò AV 1 IN (S-VIDEO1)
Video input for external devices with an
S-Video output, such as a camcorder or VCR.
Ú AUDIO OUT
Audio outputs for external devices.
Æ AV 1 IN (VIDEO)
Video input for external devices, such as
a camcorder or VCR.
ı CableCARD TM
Insert the CableCARD into the slot.
(Refer to page 31)
Note
• Please be sure to match the color coded input terminals and cable jacks.
BN68-00825N-01Eng_(002~033) 9/28/05 9:09 AM Page 10