Samsung WF56H9100AG-A2 - Manual (Page 25)

English _25
usinG steAm WAsH
If you select steam wash, the steam acts at the most effective times for the detected amount of laundry,
maximizing the effect of the steam, increasing the wash temperature, enhancing the Soak effect, and
improving wash performance.
1. Load the washer.
2. Press the power button.
3. Turn the Cycle Selector and select a steam cycle. (The Deep Steam cycle automatically selects
Steam.)
4. Press the steam button.
5. Add detergent to the dispenser tray and add fabric softener up to the marked line.
6. Press the start/pause button.
: The washer automatically selects the optimal wash conditions by sensing the weight of the laundry.
Steam may not necessarily be visible during the steam cycles. Steam may not be present during the
entire steam wash cycle.
Atc (Auto temperAture control)
ATC is the control function that the washer controls water temperature with temperature sensor (thermistor).
Because there are numerous water temperatures depending on the customer’s environment (cold
areas, warm areas, various water temperatures, settings of heater temperature, etc.), ATC function in
our washer maintains the certain level of wash temperature to output the best washing performance at
each cycle.
If you select normal & heavy duty cycles, those cycles are the regulation and UL cycles. Since new
washer must reduce the amount of energy usage as a first priority, customers will notice more cold
water entering the washers, but this is normal and not a problem.
In those regulation cycles, hot temperature is similar to acceptable adult bath-water temperature and
warm temperature is similar to comfortable swimming-pool water temperature.
If customers want to wash clothes in a specific water temperature, customers should choose a
different cycle at each temperature (Hot/Warm/Eco Warm) .
03 washing a load of laundr
y
(USER)WF56H9100-03404A_EN.indd 25 2014-3-7 10:58:22