Samsung MH17WSSS - Manual (Page 20)

Using the Stand
This monitor supports various types of VESA-standard bases. You need to either fold or remove the
base in use in order to install a VESA base.
Folding the base | Removing the base | Install a VESA base
1. Folding the base
The monitor may be reclined from 0 to 15 degrees. When fully folded (reclined), the base becomes
a handy holder for moving the monitor around.
1. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.
2. Disconnect the monitor cables.
3. Reconnect the monitor cables.
You may install a VESA base when the monitor base is fully folded.
2. Attaching the base
This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad.
VESA stand
A. Monitor
B. Mounting interface pad
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.
3. Remove four screws and then remove the Stand from the LCD monitor.
4. Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure it with
four screws that came with the arm-type base, wall mount hanger or other base.