Samsung DVD-R157-XAA - Manual (Page 28)

S
ystem Setup
English - 28
CH Digit Lock
Select the sub item(Off or Lock to two digits) using the ▲▼ buttons,
then press the ENTER button.
• Off : Select this when your cable box or satellite receiver only accepts a
three or more digit channel number. Normally select this.
• Lock to two digits : Select this when your cable box or satellite receiver
only accepts a two digit channel number.
Mode for SET button
Select the sub item(Off, Mode 1 or Mode 2) using the ▲▼ buttons, then
press the ENTER button.
Select "Mode 1" or "Mode 2" if your cable box or satellite receiver requires
pressing the SET button, after entering the channel number.
• Off : No code is sent when the SET button is pressed. Normally select this.
• Mode 1 or Mode 2 : Sends the channel number you entered.
If "Mode 1" does not work, try "Mode 2."
If your cable box or satellite receiver does not respond to either
setting, contact the manufacturer of the cable box or satellite
receiver.
Brand Code
Enter the brand code of your cable box or satellite receiver using the
number buttons, then press the ENTER button.
(See "Cable Box/Satellite Receiver Brand Code Table" on pages 75~77.)
If you cannot get the recorder to control your cable box/satellite
receiver. Check the connection and position of the IR Blaster
cable. (page15)
If your cable box or satellite receiver still does not operate with
this recorder, contact your cable company to see if they can
provide you with a compatible cable box or satellite receiver.
CM Skip Time Setting
When a program recorded on a DVD-RAM, a DVD-RW, DVD-VIDEO or
a DVD-R is played, the unit can be set to automatically skip a portion
of the program corresponding to a CM(commercial) Skip Time set by
the user.
1. With a disc inserted and the unit in Stop mode, press the MENU button
on the remote control.
2. Select Setup using the ▲▼ buttons, then press the ENTER or ►
button.
You can't use the Setup functions while playing a disc.
3. Select System using the ▲▼ buttons, then press the ENTER or ►
button.
System menu will be displayed.
4. Select CM Skip Time using the ▲▼ buttons, then press the ENTER or
► button.
CM Skip Time will be displayed.
5. Select the desired time using the ▲▼ buttons, then press the ENTER
or ► button.
6. If you press the CM SKIP button during playback, the section
corresponding to the set time is skipped, and then the next section is
played.
■
■
■
▌
Set Top Box Control DVD-Recorder
No Disc
Timer Rec.
Setup
Control : Off ►
Connection : AV1 ►
CH Digit Lock : Off ►
Mode for SET button : Off ►
Brand Code : 0000 ►
Off
Lock to two digits
MOVE ENTER RETURN EXIT
Set Top Box Control DVD-Recorder
No Disc
Timer Rec.
Setup
Control : Off ►
Connection : AV1 ►
CH Digit Lock : Off ►
Mode for SET button : Off ►
Brand Code : 0000 ►
Off
Mode 1
Mode 2
MOVE ENTER RETURN EXIT
Set Top Box Control DVD-Recorder
No Disc
Timer Rec.
Setup
Control : Off ►
Connection : AV1 ►
CH Digit Lock : Off ►
Mode for SET button : Off ►
Brand Code : 0000 ►
MOVE ENTER RETURN EXIT
CM SKIP
System DVD-Recorder
Title List
Playlist
Disc Manager
Timer Rec.
Setup
DVD-RW(VR)
Set Top Box Control ►
CM Skip Time : 15 Sec ►
EP Mode Time : 6 Hours ►
Chapter Creator : Off ►
Quick Recording : Off ►
Anynet+(HDMI-CEC) : On ►
15 Sec
30 Sec
60 Sec
MOVE ENTER RETURN EXIT
01315A(02)-R157-XAA-ENG.indb 28 01315A(02)-R157-XAA-ENG.indb 28 2007-01-25 오후 6:12:14 2007-01-25 오후 6:12:14